A car can be a second home. We shall pay attention to its maintenance and that also includes a car wash once in a while.
There is a group of people who uses the car as a tool for their job, therefore, they spend many hours inside their car, passing from many places. In the summer the car gets dirty from the dust and probably sand since we all visit the beach. In the winter there is mud.
Of course, we must consider the pet owners; they have a hard time to clean the interior of their car.
Other occasions’ that people getting stressed about their car’s cleanness are: weddings, baptism or transport of an important guest.
People say the image
of your car shows a lot of your personality and prestige.
The owners that are passionate with their car’s cleanness undertake the car wash but they do many mistakes often, car wash is not just vacuuming the interior, rubbing with a sponge the exterior and then drying, and waxing…
We will provide you with some tips that we collected; in that case, you will have more knowledge of how to clean your car or even evaluate the car cleaner you hired. Washing or waxing in a wrong way can damage the paint.
1. Set everything you will need near the car.
You will need a large supply of water, three buckets, a hose, and microfiber cloths or towels to dry it, also have two or three wash mitts on hand, a large sponge, a stiff scrubbing brush, and maybe a separate brush to scrub your tires with.
2. Hose off the car to loosen and soften the dirt.
Don’t use a strong jet of water from the hose, as this can rub grit over the paint and scratch it. Try to aim the jet of water downwards on all surfaces.
3. Wash the wheels first.
Since the wheels of your car are often the dirtiest part, it’s a good idea to wash them first, so that dirt rinsed off of the wheels won’t land on an already-clean part of your car.
4. Wash your car using a large wash mitt.
Before you begin scrubbing the surface of your car, soak a large wash mitt or sponge in the soapy water, being certain to wash out any dirt in it, and begin applying it to the car. Do not use a brush on the car body, because this may leave little scratches.
5. Start at the top
Washing the car from the top down will allow soap to drip over lower sections of the car while you’re still washing higher sections.
6. Rinse each section after you’ve washed it.
After one section is washed, rinse it with the hose before moving on. You don’t want the soap to dry on the paint and stain it. When rinsing sections, follow the same top-to-bottom pattern that you’ve used to wash the sections of your car.
7. Keep the entire car wet as you wash it.
This will prevent water droplets from drying on the paint and leaving water spots. You want to be able to dry the car with towels before it air dries.
8. Spray the hose over the bottom of your car.
After you’ve washed the majority of your car’s surfaces, use the spray from your hose to rinse the bottom of the car, from various angles.
9. Dry the vehicle with fresh towels.
Use several towels while drying your vehicle, fully wipe down all surfaces that you’ve washed, in order to prevent rust from building up. Make sure not to leave any water standing on your vehicle once it’s dried.
10. Wax the car once it’s been dried.
Wax should be applied to a clean, dry car. Abrasive polishes are rarely if ever needed with modern car paints and risk unexpected damage scouring through a clear coat.
If all these seem very difficult for you to do, tiring maybe, or you doubt you won’t damage your car in the end, then just book a professional car cleaner with our mobile application Cyprus24. Easy, fast and safe!
Source used in the article: